Dune Buggy Suspension Parts

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Latest Rage 525105E VW Conversion Drive Flanges 002 Bus Trans To 930 Cv Joint, Pair - Moore PartsLatest Rage 525105E VW Conversion Drive Flanges 002 Bus Trans To 930 Cv Joint, Pair - Moore Parts
    AC525105E
    Latest Rage 525105E VW Conversion Drive Flanges 002 Bus Trans To 930 Cv Joint, Pair
    Latest Rage 525105E VW Conversion Drive Flanges 002 Bus Trans To 930 Cv Joint. Forged Conversion Drive Flanges Are Necessary Items To Upgrade Your Suspension To Larger C.V. Joints. Drive Flanges Are Forged From Chromoly High Strength Steel, Precision machined, And Heat Treated To Handle...
    $129.95
    $129.95
  • Stainless Steel Axle Boot Clamps F/Porsche 930 & 934 Cv Joint Boots, 4 Piece - Moore Parts
    AC501120-KIT2
    Stainless Steel Axle Boot Clamps F/Porsche 930 & 934 Cv Joint Boots, 4 Piece
    Stainless Steel Axle Boot Clamp For Porsche 930 And 934 Cv Joint Boots. CV Axle Clamp is Easy To Use, Simply Line Up Pull Tight And Bend Remaining Portion Over. Includes:Qty 2 Large ClampQty 2 Small Clamp This Kit Does 2 CV Boots
    $18.95
    $18.95
  • Empi B6 - 5871 - 4 Flanged Round Spring Plate Grommets 2 - 1/4" OD X 1 - 3/4" ID, Pair - Moore Parts
    B6-5871-4
    Empi B6-5871-4 Flanged Round Spring Plate Grommets 2-1/4" OD X 1-3/4" ID, Pair
    Empi B6-5871-4 Urethane Flanged Rear Spring Plate Grommets. Required On The Outboard Side At The Spring Plate When Utilizing Custom Torsion/Spring Plate Covers. Specs: Round / Flanged 2-1/4" OD X 1-3/4" ID Sold As Pair
    $25.95
    $25.95
  • Empi 98 - 5096 Set Of 4 Hi - Perf Lightened Porsche 934 CV Joint W/Chromoly Cage - Moore Parts
    98-5096-BSET4
    Empi 98-5096 Set Of 4 Hi-Perf Lightened Porsche 934 CV Joint W/Chromoly Cage
    Empi 98-5096-B-Set4 Porsche 934 Race Prep Max Angle Lightened Hi-Performance CV Joint, 33 Spline. Set Of 4Specs:LightenedSolid Outer Race With Chromoly Cage33 Spline Center Hub1" Balls128mm Outside DiameterAvailable Angle 20-22 Degrees (Looser Fit From Factory For Maximum Angles)Application:Porsche 934Offroad RacingDune BuggiesSand RailsBaja BugsManx BuggiesKit...
    $839.95
    $839.95
  • Empi 16 - 2616 HP Chromoly 934 CV Joint Cage Only For Empi 934 CV Joints, Each - Moore Parts
    16-2616-0
    Empi 16-2616 HP Chromoly 934 CV Joint Cage Only For Empi 934 CV Joints, Each
    Empi 16-2616 Hi-Performance Chromoly 934 CV Joint Cage Only. Chromoly Construction Adds The Necessary Strength And Durability While Radiused Windows And Surfaced Ground Tolerances Provide The Most Operating Angle From Your 934 CV Joints. Specs: Chromoly Material Radiused Windows Surfaced Ground Tolerances Designed For...
    $49.95
    $49.95
  • Empi 16 - 2611 CV Joint Inner Race & Balls 930, Fits Empi 87 - 9469 - B CV's, Each - Moore Parts
    16-2611-0
    Empi 16-2611 CV Joint Inner Race & Balls 930, Fits Empi 87-9469-B CV's, Each
    Empi 16-2611 CV Joint Splined Race And .874" Ball Kit, Includes Race And 6 Balls. Race Hardened Aircraft Quality. Specs: 28 Spline Center Hub Hardened For Superior Strength Designed For Empi CV Joints (.874" Balls, .001" Undersize For Looser Fit) Application: Empi Porsche 930...
    $56.95
    $56.95
  • Empi 17 - 2673 Vw Rear Adjustable Irs Spring Plates For 24 - 11/16" Torsion Bar - Moore Parts
    17-2673-0
    Empi 17-2673 Vw Rear Adjustable Irs Spring Plates For 24-11/16" Torsion Bar
    Empi 17-2673 Classic Vw Heavy Duty Adjustable Rear Suspension IRS Spring Plates For Use With 24-11/16" Long Torsion Bars.Stock Application:Volkswagen Thing 1973-1974 IRSModified Application:Volkswagen Type 1 Baja Bug / Beetle Using 24-11/16" Torsion Bars IRSVolkswagen Type Dune Buggies Or Sandrails Using 24-11/16" Torsion Bars IRSNote:...
    $179.95
    $179.95
  • Empi 16 - 2238 Dune Buggy - Baja Bug Axle Kit 930 CV Joint 22" 28 Spline Axles - Moore PartsEmpi 16 - 2238 Dune Buggy - Baja Bug Axle Kit 930 CV Joint 22" 28 Spline Axles - Moore Parts
    16-2238-0
    Empi 16-2238 Dune Buggy-Baja Bug Axle Kit 930 CV Joint 22" 28 Spline Axles
    Empi Heavy Duty IRS Axle Kit. Complete Irs Axle Kit With 22" Chromoly Axles, Porsche 930 Cv Joints, Porsche 930 Axle Boots, Porsche 930 Axle Boot Flanges, Cv Joint Grease, 24 Cv Joint Bolts, Axle Lock Clips And Axle Boot Zip Ties.Item Detail List:Qty 1...
    $989.95
    $989.95
  • Empi 86 - 5838 Universal Stainless Steel Clamp, 7mm Wide X 16 - 1/2" Long, 10 Pack - Moore Parts
    86-5838-0
    Empi 86-5838 Universal Stainless Steel Clamp, 7mm Wide X 16-1/2" Long, 10 Pack
    Empi 86-5838 Universal Stainless Steel Clamps. Specs: Extra Large Type Stainless Steel Width 7mm Length 16-1/2" Note: Uses Standard Crimp Pliers. Clamps Are Shipped Wrapped (Round) Sold As 10 Per Pack
    $22.95
    $22.95
  • Empi 86 - 5832 Universal Stainless Steel Clamp, 7mm Wide X 14 - 1/2" Long, 100 Pack - Moore Parts
    86-5832-0
    Empi 86-5832 Universal Stainless Steel Clamp, 7mm Wide X 14-1/2" Long, 100 Pack
    Empi 86-5832 Universal Stainless Steel Clamps. Specs: Large Type Stainless Steel Width 7mm Length 14-1/2" Note: Uses Standard Crimp Pliers. Clamps Are Shipped Wrapped (Round) Sold As 100 Per Pack
    $71.95
    $71.95
  • Latest Rage Vw Rear Swing Axle Spring Plates For 21 - 3/4" Torsion Bar - Moore Parts
    AC501310
    Latest Rage Vw Rear Swing Axle Spring Plates For 21-3/4" Torsion Bar
    Latest Rage 501310 Classic Vw Heavy Duty Rear Suspension Swing Axle Spring Plates For Use With 21-3/4" Long Torsion Bars. Stock Application: Volkswagen Type 1 Bug / Beetle 1960 Thru 1968 Swing Axle Volkswagen Type 1 Karmann Ghia 1960 Thru 1968 Swing Axle Modified...
    $149.95
    $149.95
  • Heavy Duty 300M Axles 27 - 1/2" Length 28 Splines - Porsche 930 Cv Joints - Moore Parts
    AXLE-930300-27.5
    Heavy Duty 300M Axles 27-1/2" Length 28 Splines-Porsche 930 Cv Joints
    Race Proven 300M Axles For 930 Cv Joints 27-1/2 Inch Length. High Quality Solid Axles CNC Machined From The Finest 300M Steel Alloy. Material:300M Steel AlloyLength 27-1/2 Inch End To EndSpline Count: 28Application: Porsche 911 / Porsche 930 Cv JointsCNC Machined Note: Recommended For...
    $799.95
    $799.95
  • Heavy Duty 300M Axles 26 - 1/2" Length 28 Splines - Porsche 930 Cv Joints - Moore Parts
    AXLE-930300-26.5
    Heavy Duty 300M Axles 26-1/2" Length 28 Splines-Porsche 930 Cv Joints
    Race Proven 300M Axles For 930 Cv Joints 26-1/2 Inch Length. High Quality Solid Axles CNC Machined From The Finest 300M Steel Alloy. Material:300M Steel AlloyLength 26-1/2 Inch End To EndSpline Count: 28Application: Porsche 911 / Porsche 930 Cv JointsCNC Machined Note: Recommended For...
    $769.95
    $769.95
  • Front Tapered Roller Wheel Bearing For 2" Hollow Spindles, Inner Or Outer, Each - Moore Parts
    AC621133
    Front Tapered Roller Wheel Bearing For 2" Hollow Spindles, Inner Or Outer, Each
    Front Tapered Roller Wheel Bearing For 2" Hollow Spindles, Fits Inner Or Outer. Specs: Tapered Roller Bearing Set Cone LM104949 Cup LM104911 Bore 50.8 mm / 2 in Cup Outer Diameter 82.550 mm / 3.2500 in Cone Width 22.225 mm / 0.8750 in Cup...
    $19.95
    $19.95
  • USA MADE 16 - 2212 IRS 4340 Chromoly Axles F/VW Bus Cv Joints, 21 - 3/8" 33 Spline - Moore Parts
    AXLE-16-2212-0
    USA MADE 16-2212 Chromoly Axles F/VW Bus Cv Joints, 21-3/8" 33 Spline, Pair
    USA MADE 16-2212 Heavy Duty Vw Irs 4340 Chromoly Axles For Volkswagen Type 1 Bug Or Type 2 Bus Cv Joints 21-3/8 Inch Length. High Quality Solid Axles Cold Formed / Rolled Splines. Material: 4340 ChromolyLength: 21-3/8" End To EndSpline Count: 33Application: Vw Bug...
    $489.95
    $489.95
  • USA MADE 16 - 2202 IRS 4340 Chromoly Axles F/VW Bus Cv Joints, 15 - 5/8" 33 Spline - Moore Parts
    AXLE-16-2202-0
    USA MADE 16-2202 Chromoly Axles F/VW Bus Cv Joints, 15-5/8" 33 Spline, Pair
    USA MADE 16-2202 Heavy Duty Vw Irs 4340 Chromoly Axles For Volkswagen Type 1 Bug Or Type 2 Bus Cv Joints 15-5/8 Inch Length. High Quality Solid Axles Cold Formed / Rolled Splines.Material: 4340 ChromolyLength: 15-5/8" End To EndSpline Count: 33Application: Vw Bug Or...
    $479.95
    $479.95
  • Vw Bug Swingaxle Boot Split Type Includes Hardware 1949 - 68, Pair - Moore PartsVw Bug Swingaxle Boot Split Type Includes Hardware 1949 - 68, Pair - Moore Parts
    598021111A-PAIR
    Vw Bug Swing Axle Boot Split Type Includes Hardware 1949-68, Pair
    Empi 9916-B Vw Bug Stock Black Swing Axle Boot, Split Type. Includes Hardware. Application:Early Vw Swing Axle Transmissions.Type 1 Vw Bug / Beetle 1949 Thru 1968Type 1 Vw Karmann Ghia 1949 Thru 1968Type 2 Vw Bus Up To 1967Dune Buggies, Kit Cars, Baja Bugs,...
    $38.95
    $38.95
  • Vw Bug Swing Axle Or IRS Spring Plate Cover Spacer Kit, 5mm Thick. Pair - Moore PartsVw Bug Swing Axle Or IRS Spring Plate Cover Spacer Kit, 5mm Thick. Pair - Moore Parts
    00-9586-0
    Vw Bug Swing Axle Or IRS Spring Plate Cover Spacer Kit, 5mm Thick. Pair
    New to EMPI’s Continually Expanding Line of Quality Products, This 5mm Thick Spring Plate Cover Spacer Kit is Installed Between EMPI’s Adjustable Spring Plate and the Spring Plate Cover For Additional Clearance. Designed Using EMPI’s CAD Software and Manufactured With 1018 Laser Cut Steel...
    $59.95
    $59.95
  • Latest Rage 525106 VW Conversion Drive Flanges Bug / Ghia Trans To Bus Cv Joint, Pair - Moore PartsLatest Rage 525106 VW Conversion Drive Flanges Bug / Ghia Trans To Bus Cv Joint, Pair - Moore Parts
    AC525106
    Latest Rage 525106 VW Conversion Drive Flanges Bug / Ghia Trans To Bus Cv Joint, Pair
    Latest Rage 525106 VW Conversion Drive Flanges Bug/Ghia Trans To Bus Cv Joint. Forged Conversion Drive Flanges Are Necessary Items To Upgrade Your Suspension To Larger C.V. Joints. Drive Flanges Are Forged From Chromoly High Strength Steel, Precision machined, And Heat Treated To Handle...
    $129.95
    $129.95
  • Heavy Duty 300M Axles 13" Length 28 Splines - Porsche 930 Cv Joints - Moore Parts
    AXLE-930300-13
    Heavy Duty 300M Axles 13" Length 28 Splines-Porsche 930 Cv Joints
    Race Proven 300M Axles For 930 Cv Joints 13 Inch Length. High Quality Solid Axles CNC Machined From The Finest 300M Steel Alloy. Material:300M Steel AlloyLength 13 Inch End To EndSpline Count: 28Application: Porsche 911 / Porsche 930 Cv JointsCNC Machined Note: Recommended For...
    $534.95
    $534.95
  • Stainless Steel Axle Boot Clamps F/Porsche 930 & 934 Cv Joint Boots, 2 Piece - Moore Parts
    AC501120-KIT
    Stainless Steel Axle Boot Clamps F/Porsche 930 & 934 Cv Joint Boots, 2 Piece
    Stainless Steel Axle Boot Clamp For Porsche 930 And 934 Cv Joint Boots. CV Axle Clamp is Easy To Use, Simply Line Up Pull Tight And Bend Remaining Portion Over. Includes:Qty 1 Large ClampQty 1 Small Clamp This Kit Does 1 CV Boot
    $9.95
    $9.95
  • Heavy Duty 300M Axles 16 - 1/4" Length 28 Splines - Porsche 930 Cv Joints - Moore Parts
    AXLE-930300-16.25
    Heavy Duty 300M Axles 16-1/4" Length 28 Splines-Porsche 930 Cv Joints
    Race Proven 300M Axles For 930 Cv Joints 16-1/4 Inch Length. High Quality Solid Axles CNC Machined From The Finest 300M Steel Alloy. Material:300M Steel AlloyLength 16-1/4 Inch End To EndSpline Count: 28Application: Porsche 911 / Porsche 930 Cv JointsCNC Machined Note: Recommended For...
    $534.95
    $534.95
  • Vw Rear Suspension Kit Using 3X3 Trailing Arms, Vw Bug Trans / 930 CV's - Moore PartsVw Rear Suspension Kit Using 3X3 Trailing Arms, Vw Bug Trans / 930 CV's - Moore Parts
    AC598532-LA
    Vw Rear Suspension Kit Using 3X3 Trailing Arms, Vw Bug Trans / 930 CV's
    Vw Off-road Rear IRS Suspension Kit When Using 3 X 3 Trailing Arms And Type 1 Volkswagen Transmission With Porsche 930 Cv Joints. This Kit Is Ideal For Anyone Who Already Has 3 X 3 Trailing Arms. This Kit Includes Urethane Pivot Bushings, 4 X...
    $1,649.95
    $1,649.95
  • 19 Inch USA Made Off - Road Suspension Limit Straps, Sold As Pair - Moore Parts19 Inch USA Made Off - Road Suspension Limit Straps, Sold As Pair - Moore Parts
    L-STRAP-19Q
    19 Inch USA Made Off-Road Suspension Limit Straps, Sold As Pair
    Quad Suspension Limit Strap (19) Inch. A High Quality Limit Strap Is One Of The Best Investments You Can Make To Prevent Damage To Your Drivetrain, C V Joints, And Front / Rear Suspension.Get The Longest Life From Your Components With Our USA Made...
    $64.95
    $64.95
  • Empi B6 - 5871 - 6 Urethane Flange Only Grommets, 1 - 7/8" X .187" Pair - Moore Parts
    B6-5871-6
    Empi B6-5871-6 Urethane Flange Only Grommets, 1-7/8" X .187" Pair
    Empi B6-5871-6 Urethane Flange Only Rear Spring Plate Grommets. Required On The Inboard Side Between The Spring Plate And The Custom Torsion Housing. Specs: Round Flange Only 1-7/8" X .187" Sold As Pair
    $25.95
    $25.95
  • Empi 90 - 6804 Drive Axle Assembly, Left Side Vw Vanagon A/T 1983 - 92, Ea - Moore PartsEmpi 90 - 6804 Drive Axle Assembly, Left Side Vw Vanagon A/T 1983 - 92, Ea - Moore Parts
    90-6804-0
    Empi 90-6804 Drive Axle Assembly, Left Side Vw Vanagon A/T 1983-92, Ea
    Empi 90-6804 Classic Vw IRS Drive Axle Assembly. Empi's Axle Assemblies Are Assembled From All New Top Quality Components Manufactured By Empi.Includes:CV Joints Inner & Outer (Prepacked With Empi Black Moly Grease)CV Boots With Stainless Steel ClampsCenter Axle Shaft (20-1/2" Length)Application:Volkswagen Type 2 Vanagon...
    $179.95
    $179.95
  • Empi 98 - 5097 Set Of 4 Hi - Performance Porsche 934 CV Joint With Chromoly Cage - Moore Parts
    98-5097-BSET4
    Empi 98-5097 Set Of 4 Hi-Performance Porsche 934 CV Joint With Chromoly Cage
    Empi 98-5097-B-Set4 Porsche 934 Hi-Performance CV Joint, 33 Spline. Set Of 4 Specs: Solid Outer Race With Chromoly Cage 33 Spline Center Hub 1" Balls 128mm Outside Diameter Available Angle 18-20 Degrees Application: Porsche 934 Offroad Racing Dune Buggies Sand Rails Baja Bugs Manx...
    $590.95
    $590.95
  • Empi 90 - 6902 Drive Axle Assembly, Right Side Vw Bus A/T 1968 - 79, Ea - Moore PartsEmpi 90 - 6902 Drive Axle Assembly, Right Side Vw Bus A/T 1968 - 79, Ea - Moore Parts
    90-6902-0
    Empi 90-6902 Drive Axle Assembly, Right Side Vw Bus A/T 1968-79, Ea
    Empi 90-6902 Classic Vw IRS Drive Axle Assembly. Empi's Axle Assemblies Are Assembled From All New Top Quality Components Manufactured By Empi.Includes:CV Joints Inner & Outer (Prepacked With Empi Black Moly Grease)CV Boots With Stainless Steel ClampsCenter Axle Shaft (19-7/8" Length)Application:Volkswagen Type 2 Vw...
    $197.95
    $197.95
  • Empi 90 - 6901 Drive Axle Assembly, Left Side Vw Bus A/T 1968 - 79, Ea - Moore PartsEmpi 90 - 6901 Drive Axle Assembly, Left Side Vw Bus A/T 1968 - 79, Ea - Moore Parts
    90-6901-0
    Empi 90-6901 Drive Axle Assembly, Left Side Vw Bus A/T 1968-79, Ea
    Empi 90-6901 Classic Vw IRS Drive Axle Assembly. Empi's Axle Assemblies Are Assembled From All New Top Quality Components Manufactured By Empi.Includes:CV Joints Inner & Outer (Prepacked With Empi Black Moly Grease)CV Boots With Stainless Steel ClampsCenter Axle Shaft (18" Length)Application:Volkswagen Type 2 Vw...
    $179.95
    $179.95
  • Empi 87 - 9916 Set Of 4 CV Joint Vw Super Beetle Ghia Baja Bug Dune Buggy - Moore Parts
    87-9916-0SET4
    Empi 87-9916 Set Of 4 CV Joint Vw Super Beetle Ghia Baja Bug Dune Buggy
    Empi 87-9916-0-Set4 Vw Bug, Karmann Ghia, Squareback CV Joint, 33 Spline. Set Of 4. Specs: Solid Outer Race With Heavy Duty Cage 33 Spline Center Hub .6875" Balls 90mm Outside Diameter Application: Volkswagen Type 1 Bug 1968 Thru 1977 Volkswagen Type 1 Super Beetle...
    $189.95
    $189.95
  • Empi 17 - 2667 Vw Rear Irs Spring Plates For 26 - 9/16" Torsion Bar - Moore Parts
    17-2667-0
    Empi 17-2667 Vw Rear Irs Spring Plates For 26-9/16" Torsion Bar
    Empi 17-2667 Classic Vw Heavy Duty Rear Suspension IRS Spring Plates For Use With 26-9/16" Long Torsion Bars. Stock Application: Volkswagen Type 1 Bug / Beetle 1968 Thru 1971 IRS (3 Hole) Volkswagen Type 1 Karmann Ghia 1968 Thru 1971 IRS (3 Hole) Modified Application:...
    $149.95
    $149.95
  • Empi 17 - 2671 Vw Rear Adjustable Swing Axle Spring Plates F/ 26 - 9/16" Torsion Bar - Moore Parts
    17-2671-0
    Empi 17-2671 Vw Rear Adjustable Swing Axle Spring Plates F/ 26-9/16" Torsion Bar
    Empi 17-2671 Classic Vw Heavy Duty Adjustable Rear Suspension Swing Axle Spring Plates For Use With 26-9/16" Long Torsion Bars. Modified Application: Volkswagen Type 1 Baja Bug / Beetle Using 26-9/16" Torsion Bars Volkswagen Type Dune Buggies Or Sandrails Using 26-9/16" Torsion Bars Note:...
    $199.95
    $199.95
  • Empi 86 - 5831 Universal Stainless Steel Clamp, 7mm Wide X 7" Long, 100 Pack - Moore Parts
    86-5831-0
    Empi 86-5831 Universal Stainless Steel Clamp, 7mm Wide X 7" Long, 100 Pack
    Empi 86-5831 Universal Stainless Steel Clamps. Specs: Small Type Stainless Steel Width 7mm Length 7" Note: Uses Standard Crimp Pliers. Clamps Are Shipped Wrapped (Round) Sold As 100 Per Pack
    $54.95
    $54.95
  • Empi 211 - 405 - 641A Vw Bus Type 2 Front Wheel Seal Drum Brakes, 1955 - 63, Each - Moore Parts
    211-405-641A
    Vw Bus Type 2 Front Wheel Seal Drum Brakes, 1955-63, Each
    Front Wheel Bearing Seal For Type 2 Vw Bus. Grease Seals Keep The Grease In The Wheel Bearings And Off The Brake Shoes Or Disc Pads. These Should Be Changed When You Change The Front Wheel Bearings.Application:Volkswagen Type 2 Bus 1955 Thru 1963Sold As...
    $8.95
    $8.95
  • Heavy Duty 300M Axles 30" Length 28 Splines - Porsche 930 Cv Joints - Moore Parts
    AXLE-930300-30
    Heavy Duty 300M Axles 30" Length 28 Splines-Porsche 930 Cv Joints
    Race Proven 300M Axles For 930 Cv Joints 30 Inch Length. High Quality Solid Axles CNC Machined From The Finest 300M Steel Alloy. Material:300M Steel AlloyLength 30 Inch End To EndSpline Count: 28Application: Porsche 911 / Porsche 930 Cv JointsCNC Machined Note: Recommended For...
    $819.95
    $819.95
  • Heavy Duty 300M Axles 27" Length 28 Splines - Porsche 930 Cv Joints - Moore Parts
    AXLE-930300-27
    Heavy Duty 300M Axles 27" Length 28 Splines-Porsche 930 Cv Joints
    Race Proven 300M Axles For 930 Cv Joints 27 Inch Length. High Quality Solid Axles CNC Machined From The Finest 300M Steel Alloy. Material:300M Steel AlloyLength 27 Inch End To EndSpline Count: 28Application: Porsche 911 / Porsche 930 Cv JointsCNC Machined Note: Recommended For...
    $769.95
    $769.95
  • Heavy Duty 300M Axles 26" Length 28 Splines - Porsche 930 Cv Joints - Moore Parts
    AXLE-930300-26
    Heavy Duty 300M Axles 26" Length 28 Splines-Porsche 930 Cv Joints
    Race Proven 300M Axles For 930 Cv Joints 26 Inch Length. High Quality Solid Axles CNC Machined From The Finest 300M Steel Alloy. Material:300M Steel AlloyLength 26 Inch End To EndSpline Count: 28Application: Porsche 911 / Porsche 930 Cv JointsCNC Machined Note: Recommended For...
    $745.95
    $745.95
  • Heavy Duty 300M Axles 25 - 1/2" Length 28 Splines - Porsche 930 Cv Joints - Moore Parts
    AXLE-930300-25.5
    Heavy Duty 300M Axles 25-1/2" Length 28 Splines-Porsche 930 Cv Joints
    Race Proven 300M Axles For 930 Cv Joints 25-1/2 Inch Length. High Quality Solid Axles CNC Machined From The Finest 300M Steel Alloy. Material:300M Steel AlloyLength 25-1/2 Inch End To EndSpline Count: 28Application: Porsche 911 / Porsche 930 Cv JointsCNC Machined Note: Recommended For...
    $745.95
    $745.95
  • Heavy Duty 300M Axles 21 - 1/2" Length 28 Splines - Porsche 930 Cv Joints - Moore Parts
    AXLE-930300-21.5
    Heavy Duty 300M Axles 21-1/2" Length 28 Splines-Porsche 930 Cv Joints
    Race Proven 300M Axles For 930 Cv Joints 21-1/2 Inch Length. High Quality Solid Axles CNC Machined From The Finest 300M Steel Alloy. Material:300M Steel AlloyLength 21-1/2 Inch End To EndSpline Count: 28Application: Porsche 911 / Porsche 930 Cv JointsCNC Machined Note: Recommended For...
    $604.95
    $604.95
  • Vw Bug Swing Axle Boot Solid Type Includes Hardware 1949 - 68, Pair - Moore PartsSwingaxle Boot Solid Type W/Hd - Moore Parts
    598151111K-PAIR
    Vw Bug Swing Axle Boot Solid Type Includes Hardware 1949-68, Pair
    Empi 9917-B Vw Bug Stock Black Swing Axle Boot, Solid Non Split Type. Includes Hardware. Application:Early Vw Swing Axle Transmissions.Type 1 Vw Bug / Beetle 1949 Thru 1968Type 1 Vw Karmann Ghia 1949 Thru 1968Type 2 Vw Bus Up To 1967Dune Buggies, Kit Cars,...
    $32.95
    $32.95
  • 86 - 2397 - D C.V. Joint Boot Kit, Each - Moore Parts
    86-2397-D
    86-2397-D C.V. Joint Boot Kit, Each
    Empi 86-2397-D C.V. Boot Kit Sold As Each
    $12.95
    $12.95
  • Rear IRS Bearing Kit W/Seals, Clips, Spacers & End Caps Vw Squareback, 1968 - 73 - Moore PartsRear IRS Bearing Kit W/Seals, Clips, Spacers & End Caps Vw Squareback, 1968 - 73 - Moore Parts
    AC598904-TYPE3
    Rear IRS Bearing Kit W/Seals, Clips, Spacers & End Caps Vw Squareback, 1968-73
    Rear Wheel Bearing Kit With Seals, Clips, Spacers, Chrome End Caps & Bolts For IRS Type 1 Vw Bug, Ghia, Squareback.Includes:Qty 2 Inner Wheel BearingQty 2 Outer Wheel BearingQty 2 Rear Wheel Bearing SealQty 2 Rear Axle Seal Kit With Cotter PinsQty 2 Snap...
    $162.95
    $162.95
  • Rear Swing Axle Bearing Kit With Seals Vw Squareback 1964 - 67 - Moore PartsRear Swing Axle Bearing Kit With Seals Vw Squareback 1964 - 67 - Moore Parts
    AC598908-GHIA
    Rear Swing Axle Bearing Kit With Seals Vw Karmann Ghia 1956-68
    Rear Swing Axle Bearing Kit With Seals Vw Karmann Ghia 1956-1968Includes:Qty 2 Wheel BearingsQty 2 Rear Axle Seal Kit With Cotter PinsQty 2 Large Flat Oil Sling WashersQty 8 Bearing Cap Bolt 10mm X 35mm  Application:Volkswagen Type 1 Bug 1949 Thru 1968Volkswagen Type 1 Karmann Ghia 1956...
    $41.95
    $41.95
  • Empi 86 - 2515 High Speed Boot For Porsche 930 Cv Joint, Set Of 4 - Moore Parts
    86-2515-SET4
    Empi 86-2515 High Speed Boot For Porsche 930 Cv Joint, Set Of 4
    Empi 86-2515 High Speed Boot For Porsche 930 Cv Joint. Specs:108mm O.D. CV JointsProp Shaft ApplicationsShort Boot Limits Axle Angle Fits Empi CV Joints Listed Below:87-9469-B87-9470-B98-5094-B98-5093-B Sold As Set Of 4
    $169.95
    $169.95
    Notify me
    Notify me
  • Vw Bug Swing Axle Tubes With Side Flanges, Pair - Moore Parts
    AC501150
    Vw Bug Swing Axle Tubes With Side Flanges, Pair
    Volkswagen Steel Swing Axle Tubes With Flanges For Early Vw Swing Axle Transmissions.Fits Type 1 Vw Bug, Beetle, Karmann Ghia Up To 1968. Will Work With All 3 Lengths of Swing Axles, 26-11/16, 27 13/16, And 28-7/16Note: Fits All Stock And Most Aftermarket Axles. Will Require...
    $139.95
    $139.95
    Notify me
    Notify me
  • Bearing Adapter F/Ball Joint Vw Spindle Mount Wheel. Use W/AC621130 - I Bearing - Moore PartsBearing Adapter F/Ball Joint Vw Spindle Mount Wheel. Use W/AC621130 - I Bearing - Moore Parts
    AC621130-SP
    Bearing Adapter F/Ball Joint Vw Spindle Mount Wheel. Use W/AC621130-I Bearing
    Vw Bug Bearing Spacer Adapter Insert For Ball Joint Vw Aluminum Spindle Mount Wheels. This Must Be Used With AC621130-I Sealed Bearing. When Using Aluminum Spindle Mount Wheels This Spacer Allows You To Use AC621130-I Sealed Bearing On The Outer Application And You Must...
    $14.95
    $14.95
    Notify me
    Notify me
  • Porsche 934 Cv Joint Chromoly Flange - Use With Large Axle Boot AC501111, Each - Moore Parts
    AC501111F
    Porsche 934 Cv Joint Chromoly Flange - Use With Large Axle Boot AC501111, Each
    Porsche 934 Cv Joint Chromoly Flange Only. Use With Large Cone Boot #AC501111. When Assembled Cv Bolts Are Not Exposed And Are Under The Boot. Used On Dune Buggies And Sandrails With IRS Vw Transmissions With Porsche 934 Cv Joints.
    $34.95
    $34.95
    Notify me
    Notify me
  • Porsche 934 Cv Joint Mini Axle Boot Without Flange - Use With Flange AC501106F - Moore Parts
    AC501106
    Porsche 934 Cv Joint Mini Axle Boot Without Flange - Use With Flange AC501106F
    Porsche 934 Cv Joint Axle Boot Without Flange. Small Cone Style, When Assembled Cv Bolts Are Exposed. Use With Flange #AC501106F. Used On Dune Buggies And Sandrails With IRS Vw Transmissions With Porsche 934 Cv Joints. Empi 86-2377
    $28.95
    $28.95
    Notify me
    Notify me
  • Empi 86 - 2515 High Speed Boot For Porsche 930 Cv Joint, Pair - Moore Parts
    86-2515-PAIR
    Empi 86-2515 High Speed Boot For Porsche 930 Cv Joint, Pair
    Empi 86-2515 High Speed Boot For Porsche 930 Cv Joint. Specs:108mm O.D. CV JointsProp Shaft ApplicationsShort Boot Limits Axle Angle Fits Empi CV Joints Listed Below:87-9469-B87-9470-B98-5094-B98-5093-B Sold As Pair
    $89.95
    $89.95
    Notify me
    Notify me
  • Vw Bus Conversion Swing Axle Tubes, Eliminate Reduction Boxes, Pair - Moore Parts
    AC501149
    Vw Bus Conversion Swing Axle Tubes, Eliminate Reduction Boxes, Pair
    Latest Rage 501149 Volkswagen Bus Unpainted Steel Swing Axle Conversion Tubes With Flanges For Early Vw Swing Axle Transmissions.Fits Type 2 Vw Bus, To Eliminate Reduction BoxesNote: Fits All Stock And Most Aftermarket Axles. May Not Work With Race Axles or Large Diameter Sway-A-Way...
    $139.95
    $139.95
    Notify me
    Notify me