https://d3d71ba2asa5oz.cloudfront.net/12022008/images/ac603100-2.jpg

Latest Rage Aluminum 1/2" Thick Wheel Spacer For 5X205 Lug Bolt Pattern, Pair

SKU: AC603100-12
$79.95
$79.95

Free Shipping | Contiguous USA | No Purchase Minimums

WARNING: This product can expose you to certain chemicals, which are known to the State of California to cause cancer, birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov

Latest Rage 603100-12 Vw 5 Lug Aluminum Wheel Spacer With 12mm Holes, Can Be Drilled To 14mm. Allows You To Space Your Wheel Out 1/2" From Vehicle. Use With Vw 5 X 205mm Lug Bolt Pattern.

Wheel Spacer Specs:
5 X 205mm Vw Lug Bolt Pattern
Aluminum Adapter Plates 1/2" Thick

Sold As Pair

Note: It Is Imperative That The Correct Lug Nuts/Bolts Are Used To Secure The Wheel To The Vehicle. All Lug Bolts Need To Be Checked To Be Certain
That They Are Not Interfering With Internal Brake Parts. Grinding For Clearance May Be Necessary And Is The Responsibility Of The Installer. All Lug
Nuts Need To Be Checked To Be Certain That They Are In Fact Tightening The Wheel To The Rotor/Drum And Not Bottoming Out On The Stud Leaving
The Wheel Loose. This Is The Responsibility Of The Installer.

EVERYTHING SHIPS FREE

Contiguous USA (Excludes Alaska, Hawaii & other US Territories).
No minimum purchase required.
All orders that select free shipping at checkout are routed the least expensive method to you.
If you require a specific carrier due to your shipping address, you must select a paid shipping option at checkout.
For all other US Territories, Alaska, Hawaii & other countries shipping will be calculated at checkout for you.
We do not ship to PO Boxes.
We ship worldwide via UPS & USPS from Southern California.

RETURNS

We happily accept returns or exchanges as long as the merchandise is in NEW condition (never been installed/mounted), complete with all original packaging, accompanied by a Return Authorization and back in our warehouse within 30 days of receiving.

  • We are unable to accept returns on electrical parts, floor pans, windshields, transmissions & engines.
  • All orders are subject to a 20% restocking fee
  • Returns sent back without a pre-approved RA# will be refused.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Deano
1970 Fiberglass Dunebuggy, I have

1970 Fiberglass Dunebuggy, I have had this Buggy for about 15 years. It was an old thrasher and a lot of fun. I decided to take it all apart and rebuild from the ground Up. I built my own rear trailing arms and coil over suspension. I also made my own 3” lifted front spindles and installed spring pack adjusters in the ball joint front end. Additionally, the body sits on a 4” body lift I built from rectangular box tubing. The mojo is from a single carb 2180 through an 091 bus box and 930 CVs. This car was a lot of fun to build and even more fun to drive. If the parts were not custom made by me, then I bought the parts at Moore. The people over at Moore really know VW and really know Off-Road. Thank guys for all you do, every day. I couldn’t have finished this ride without your help.

Related Products