15" X 4-1/2" Porsche 5 Lug Polished Empi 911 Alloy Wheel Includes Cap-Valve Stem


Sold as Each

(contiguous USA only)

WARNING: This product can expose you to certain chemicals, which are known to the State of California to cause cancer, birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov

Product Description

9678 Empi 911 Alloy Wheel With Center Cap & Valve Stem For Classic Vw Bug, Karmann Ghia, Volkswagen Bus, Porsche.

All Polished Finish
15" Diameter X 4-1/2" Wide
5x130mm Lug Bolt Pattern
Back Space Is 4-1/2" On This Wheel
R-14 Ball Seat Lug Bolt Surface
Required Lug Nuts: Moore #WHL018-C Empi #70-2867

*NOTE: This wheel comes with a chrome center cap and does not match finish of wheel exactly.

Off-Set Or Et On This Wheel Is Positive (+) 45mm. (Note Off-Set Is The Distance In mm Between The Center Line Of The Wheel, And The Mounting Surface Of The Wheel. You Can Have Positive (+), Negative (-), Or Neither (0). Off-Set Determines The Position Of The Wheel Under The Fender)

Note: It Is Imperative That The Correct Lug Nuts/Bolts Are Used To Secure The Wheel To The Vehicle. All Lug Bolts Need To Be Checked To Be Certain That They Are Not Interfering With Internal Brake Parts. Grinding For Clearance May Be Necessary And Is The Responsibility Of The Installer. All Lug Nuts Need To Be Checked To Be Certain That They Are In Fact Tightening The Wheel To The Rotor/Drum And Not Bottoming Out On The Stud Leaving The Wheel Loose. This Is The Responsibility Of The Installer.

Customers Also Viewed